Price Lists
Sandblasting - $42.00 per hour
Motorcycle & ATV Powder Coating Price List
Item |
Cost |
Item |
Cost |
|
Air Cleaners |
|
|
Handle Bar Riser |
30.00 |
Front |
30.00 |
|
Headlight Rim |
20.00 |
Back |
25.00 |
|
Headlight Shell |
25.00 |
Battery |
|
|
Headlight Shroud - FL |
42.00 |
Base
Plate |
25.00 |
|
Horn Cover |
20.00 |
Box |
25.00 |
|
Hubs
($/each) |
30.00 |
Strap |
13.00 |
|
Inspection Covers |
15.00 |
Top
Plate |
13.00 |
|
Kick Stand & Hardware
(Side) |
42.00 |
Brackets |
|
|
Kick Stand
(Center) |
36.00 |
Small |
8.00 |
|
Master Cylinder |
42.00 |
Large |
20.00 |
|
Master Cylinder Cover |
13.00 |
Brakes |
|
|
Manifold |
36.00 |
Arm |
18.00 |
|
Nose Cone
|
|
Backing Plate |
33.00 |
|
Point Housing |
42.00 |
Disc
Rotor (Hub Center) |
60.00 |
Mag.
Style |
60.00 |
|
Pedals |
22.00 |
|
Oil Pump Cover |
22.00 |
Rod |
18.00 |
|
Oil Pump Housing |
55.00 |
Calipers |
55.00 |
|
Oil Tank |
|
Chain Guards |
|
|
Small Stock |
58.00 |
British |
36.00 |
|
NEW
Wrap Around |
66.00 |
Non-British |
50.00 |
|
USED
Wrap Around |
90.00 |
Crash Bars
(with brackets) |
50.00 |
|
Primary |
|
Coil Bracket |
20.00 |
|
Inner |
50.00 |
Dash Housing |
50.00 |
|
Outer |
72.00 |
Engines |
|
|
Push Rod Tubes
($/each) |
20.00 |
Cases - Pair |
216.00 |
|
Rocker Box Covers |
|
Cylinder Barrels ($/each) |
50.00 |
|
Set of 2 |
90.00 |
w/ Polished Edges
($/ea.) |
120.00 |
|
Evolution Set (6 pieces) |
170.00 |
Cylinder Heads ($/each) |
90.00 |
|
Evolution ($/each) |
40.00 |
w/ Polished Edges ($/ea.) |
180.00 |
|
Shifters |
17.00 |
Engine Skid Plate |
32.00 |
|
Shock Covers
($/each) |
25.00 |
Fender Rails
($/set) |
60.00 |
|
Sissy Bars |
36.00 |
Foot Pegs |
20.00 |
|
Sprocket
(No Masking) |
36.00 |
Fenders |
|
|
Springs |
|
Front |
60.00 |
|
Front End (Springer) |
30.00 |
Rear |
120.00 |
|
Shock Springs |
30.00 |
Fork Legs
(front/lower) ($/set) |
115.00 |
|
Transmission |
|
Frames |
|
|
Case |
60.00 |
All |
180.00 |
|
Top
Cover |
30.00 |
Swing arm |
80.00 |
|
End
Cover |
25.00 |
Gas Caps
(non-ratchet) |
20.00 |
|
Plate |
28.00 |
Gas Tanks |
|
Release Lever |
20.00 |
|
1
colour |
240.00 |
|
Triple Trees |
|
2
colour |
360.00 |
Upper |
36.00 |
|
Hand Lever |
20.00 |
Lower |
55.00 |
|
Handle Bars |
50.00 |
|
Narrow Glide
(Upper/Lower) |
50.00 |
Handle Bar Clamps
(2 piece) |
15.00 |
|
Wide Glide
(Upper/Lower) |
55.00 |
|
Wheels
($/each) |
|
||
|
Aluminum Spoke (Cast/Billet) |
103.00 |
||
|
Aluminum Solid Disc (Cast/Billet) |
103.00 |
||
|
ATV |
20.00 |
||
|
Dirt
Bike |
42.00 |
||
|
Dirt
Bike (Hubs) |
25.00 |
||
|
Keep In Mind:
- Above prices include
masking of all threads, preparation, and powder coating using a
stock colour. Custom colours available at customers cost, allow
approx. one week for shipping.
- Removal of bearing and replacement
available on request but not included in original price
- Any additional service negotiated at
$55.00/hour base rate
- For a second coat add 50% for a
clear coat. Clear coat is required over all metal and silver
coating.
- Prices subject to change
- Volume discount is available
- HST/GST and Shipping Charges will be
added when applicable
Automotive Price List
Item |
Cost |
Item |
Cost |
|
A-Arm (Upper/Lower) |
55.00 |
|
Intake Manifold
(no heat riser) |
|
Air Cleaner Covers
(2 piece) |
|
|
Typical V6 or V8 |
90.00 |
Small |
42.00 |
|
Tuned Port Injection |
210.00 |
Medium |
55.00 |
|
Master Cylinders |
|
Large |
66.00 |
|
Brake |
36.00 |
Alternator Housings |
55.00 |
|
Clutch |
36.00 |
Axel (Housing Only) |
180.00 |
|
Nerf Bars for Pickup/Jeep |
120.00 |
Bolt Heads |
|
|
Oil Pan |
50.00 |
Small 3/8 & Under |
2.00 |
|
Pulleys |
20.00 |
Large 1/2 & Up |
4.00 |
|
Power Steering Box |
72.00 |
Battery Box |
|
|
Radiator Core Supports |
|
Small |
22.00 |
|
Typical Passenger |
85.00 |
Large |
30.00 |
|
Large Passenger/Truck |
132.00 |
Brakes |
|
|
Rad Holddown |
25.00 |
Disc. Rotor (Non-drilled) |
72.00 |
|
Rearend |
180.00 |
Disc. Rotor (Drilled) |
110.00 |
|
Roll Bars |
|
Disc. Back Plate |
25.00 |
|
2-Point |
60.00 |
Disc. Caliper |
60.00 |
|
2-7
Point |
180.00 |
Brake Drum |
60.00 |
|
2"
Tube x 16' |
66.00 |
Brake Drum Back Plate |
42.00 |
|
Spindles (Masked Races) |
36.00 |
Brackets |
|
|
Springs |
|
Small |
8.00 |
|
Coil
($/each) |
42.00
|
Medium |
13.00 |
|
Leaf
incl. clamp & bolt ($/e) |
90.00 |
Large |
20.00 |
|
Stabilizer |
|
Bumpers |
|
|
Sway
Bars |
36.00 |
Standard |
90.00 |
|
Pan
hard Bar |
36.00 |
Brush Guard Bumper |
120.00 |
|
Thermostat Housing |
20.00 |
Truck Bumper |
120.00 |
|
Third Member |
90.00 |
Chassis |
|
|
Tie Rods (Mask Threads) |
30.00 |
Small Passenger/Street Rod |
420.00 |
|
Timing Cover |
30.00 |
Typical Pass./Street Rod |
480.00
|
|
Transmission Housing |
|
Large Passenger/Truck |
540.00
|
|
Automatic |
240.00 |
Sub-frame |
210.00
|
|
Manual |
120.00 |
Cylinder Block V8 |
600.00
|
|
Transmission Pan |
25.00 |
Cylinder Block V6 |
480.00 |
|
Trailer Hitch |
90.00 |
Cylinder Block 4 Cyl |
420.00 |
|
U-Bolts ($/each) |
20.00 |
Cylinder Heads V6 & V8
($/ea.) |
300.00 |
|
Valve Covers
(Plain) |
|
Cylinder Heads Straight V6 |
360.00 |
|
6-cylinder ($/each) |
55.00 |
Cylinder Heads Straight 4
Cyl |
270.00 |
4-cylinder ($/each) |
50.00 |
|
Drive Shafts |
55.00 |
|
V8 ($/pair) |
55.00 |
Fan |
36.00 |
|
Water Pump |
36.00 |
Fan Shroud |
36.00 |
|
Wheels |
|
Fender Wells
(Inner Panels) |
|
|
Standard Steel 15" |
55.00 |
Typical ($/each) |
50.00 |
|
Cast
Aluminum 14" - 20" |
66.00 |
Large ($/each) |
72.00 |
|
Cast
Magnesium 16" |
120.00 |
Undercoating removal extra |
+30% |
|
Wire
Wheels |
110.00 |
Half Shaft |
42.00 |
|
Knock Offs |
55.00 |
Headlight Bucket |
22.00 |
|
Wheels PC - Centers Only |
145.00 |
Headlight Ring |
20.00 |
|
Wheel Centers Only (3 pc.)
|
30.00 |
Hood Hinge (Typical &
Dom.)
|
36.00 |
|
Lug
Nut ($/each) |
4.00 |
Idler Arms |
20.00 |
|
Windshield Wiper Arms |
25.00 |
Jack Stands |
25.00 |
|
||
License plate frame |
13.00 |
Keep In Mind:
Above prices include
masking of all threads, and powder coating using a
stock colour. Custom colours available at customers cost, allow
approx. one week for shipping.
For a second coat add 50% for a clear coat. Clear coat is
required over all metal and silver coating.
Removal of bearing and replacement available on request but
not included in original price
Any additional service negotiated at $55.00/hour base rate
Prices subject to change
Volume discount is available